Tuff Country

4.5 Inch Lift Kit 00-02 Dodge Ram 2500/3500 w/ SX8000 Shocks Fits Models with Factory Overloads Tuff Country

  • Sale
  • Regular price $1,596.00

  • SKU: 35933KN

Get additional tire clearance to fit 35 inch tires and get a cool new look with this Tuff Country Dodge Ram 4.5 inch lift kit. This Dodge lift kit uses coil spring tower brackets that mount above your factory coil springs to lift the front end. Rear cast iron blocks (replace the factory blocks) and rear add-a-leafs lift the rear of the Dodge Ram.

The advantage of using the coil tower brackets is you maintain a factory ride while being securely bolted in above your factory coil springs. Extended upper and lower control arms w/poly bushings, a track bar relolcating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly. Tuff Country has been producing quality suspension products for over 25 years and backs all lift kits with a limited lifetime warranty.

  • 4.5 Inch Lift Kit w/ SX8000 Shocks (Fits Models w/ Factory Overloads
  • Upper and lower control arms included to maintain proper alignment
  • Upper coil spring tower brackets retain a factory ride
  • Pitman arm included
  • New track bar bracket included
  • Allows use of 35 inch x 12.5 inch tires
  • Proudly Made in the USA
  • Limited Lifetime Warranty
  • Sold As A Kit


  • 2000-2002 Dodge Ram 2500 4WD w/ Factory Overloads
  • 2000-2002 Dodge Ram 3500 4WD w/ Factory Overloads

Installation Notes:

  • Factory length shocks must be replaced with new extended shocks to install this lift kit properly
  • Will not fit with the Off Road models
  • Will not fit with Dana 70 or Dana 80 front end
  • Recommended Tire Size: 35 Inch x 12.5 Inch
  • Amount of Lift: 4.5 Inch Front / 4 Inch Rear
  • Includes: 2) 4.5 Inch Upper coil spring tower brackets, 2) Upper control arms, 2) Lower control arms, 1) track bar bracket, 2) sway bar drop brackets, 1) Track bar support bracket, 2) Rear add-a-leafs, 2) 5.5 inch rear lift blocks (replaces factory blocks), 4) U-bolts, 1) Pitman arm and required hardware, 4) SX8000 Shocks